Cell Isolator

Safe and Efficient Isolation of Electrowinning Cells During Maintenance
The Cell Isolator is designed to electrically isolate individual electrowinning cells for maintenance, inspection, or operational adjustments without shutting down the entire circuit. By providing a secure break in the current path, it ensures worker safety and prevents accidental energization of the isolated cell. Built with robust materials and precision engineering, the Cell Isolator withstands the harsh chemical and electrical environment of copper electrowinning plants.
Technical Specifications
|
Parameter |
Specification |
|
Material |
High-conductivity copper contacts with insulating housing |
|
Insulation Material |
FRP, epoxy-coated fiberglass, or high-durability polymer |
|
Operation Method |
Manual or pneumatic |
|
Surface Protection |
Anti-corrosion and anti-oxidation coating |
|
Customization |
Dimensions and capacity tailored to specific cell design |
Product Advantages
- What you care: Complete electrical separation during maintenance.
- How we deliver: Dual-insulation design (insulating housing + contact gap ≥5mm) + 100% factory testing (DC hipot test at 500V). Ensures <1mA leakage current - meets OSHA 1910.333 safety standards.
- What you care: Long-term performance in acidic mist/humidity.
- How we deliver: FRP housing (resistant to 98% sulfuric acid) + copper contacts with electroless nickel plating (corrosion rate <0.01mm/year in salt spray tests).
- What you care: Quick, safe engagement/disengagement.
- How we deliver: Ergonomic manual levers (force <20N) or pneumatic actuators (response time <3s). Equipped with mechanical interlock - only operable when cell is de-energized.
- What you care: Seamless fit with existing systems.
- How we deliver: On-site measurement service + 3D modeling of your busbar/shorting frame. Customized mounting brackets ensure 100% alignment.
|
Pain Point |
Our Solution |
|
Prevent accidental electrical contact |
Mechanical interlock + visible "isolated" indicator light. Complies with NFPA 70E arc flash standards. |
|
Handle high current without overheating |
Copper contacts with 200mm² cross-section + heat-dissipating fins. Temperature rise <30℃ under 50kA load (tested per UL 489). |
|
Reduce replacement frequency |
8-year design life (vs. industry average 5 years). Free annual inspection service for first 3 years. |

Packaging & Transportation Requirements
Shock-proof packaging to protect insulating components.
Sealed moisture-proof wrapping for sea freight.
Logistics support: Included "unpacking & inspection guide" with step-by-step checks (e.g., insulation resistance test points) to confirm product integrity on arrival.
FAQ for Conversion
Hot Tags: cell isolator, China cell isolator suppliers, Cell Isolator, Short Circuit Bar, Shorting Bar, shorting frame, Short Circuit Frame
Previous
Short Circuit FrameYou Might Also Like
Send Inquiry














