Copper Oxide Ore Agitation Leaching: A Step-by-Step Guide from Ore to Cathode Copper

Copper oxide ores
Agitation leaching process is one of the most cost-effective ways to recover copper from copper oxide ores. Here is the simple idea behind it: an acidic solution is sprinkled over crushed ore piled in a heap, the solution dissolves the copper out of the rock, and that copper-rich liquid is then purified and turned into high-quality cathode copper.
In this blog, we will walk through the entire Agitation leaching process step by step - from raw ore preparation all the way to the final cathode copper product. Whether you are evaluating a project or simply want to know how the process works, you will finish with a clear understanding of each stage.

Copper oxide ores
The Process Overview
The complete process can be divided into 5 main stages:
- Raw ore preparation - crushing and screening the ore
- Ball milling - grinding the ore to the fineness leaching requires
- Agitation leaching - dissolving the copper into the leach solution
- Solvent extraction - concentrating the copper
- Electrowinning - depositing cathode copper
Let us look at each stage in turn.
1. Raw Ore Preparation
Before leaching can begin, the raw ore must be brought to the right size and condition so that the leaching solution can work effectively.
1) Crushing
Based on the ore's lump size, hardness and process requirements, crushers such as jaw crushers and cone crushers break the ore down into smaller pieces. This increases the contact conditions between the ore and the leaching solution.
The target particle size is determined through leaching tests and permeability studies. Some projects use a rough range of 10–50 mm as an initial reference, but the final design should never rely on fixed numbers - every ore is different.

Crushing
2) Screening
Vibrating screens sort the crushed ore by size. Their job is to control the proportion of oversize material, which can otherwise hurt the uniformity and efficiency of the leaching process.

Screening
2. Ball milling
Ball milling is a operation for grinding of ore in oxidative copper ore heap leaching production. In line with the particle size requirements of the leaching process, a ball mill is used to further grind the crushed ore, improving the liberation and exposure of oxide copper minerals and increasing the contact efficiency between the leachant and the minerals, thereby creating favorable conditions for the subsequent leaching step.
Main equipment includes:
- Ball mill and the associated drive and feed systems.
- Classification equipment (such as hydrocyclones, spiral classifiers, etc.).
- Grinding media (steel balls) and the make-up ball addition device.
- Pulp conveying and circulating-return (pebble/coarse) systems.
The operation of the ball milling system needs to take into account factors such as ore hardness, feed particle size, grinding pulp density, and media wear. The relevant parameters should be determined according to the ore properties and process requirements, and the grinding fineness or steel ball charge from one project must not be directly used as a universal standard for all copper ore projects.

Ball mill machine

Steel balls
3. Agitation Leaching
Agitated leaching is the leaching step in the oxidative copper ore hydrometallurgical flow sheet by which copper enters the solution. The pulp from crushing and grinding is thoroughly mixed with the leachant in an agitated leaching tank. Under agitation the solid particles are kept in suspension, accelerating the leaching reaction and dissolving the copper from the oxide copper minerals into the solution.
Main equipment includes:
- Agitated leaching tanks and the agitation devices.
- Pulp conveying and circulation systems.
- Leachant preparation and acid-addition systems.
- Thickening, filtration, and residue-handling equipment.
The design of the agitated leaching system needs to take into account factors such as the type of copper minerals, particle size, leaching temperature, acidity, liquid-to-solid ratio, and leaching time. The relevant operating parameters should be determined based on the ore properties and leaching tests, and the leaching conditions from one project must not be directly used as a universal standard for all copper ore projects.

Agitated leaching tanks
4. Solvent Extraction (SX)
Solvent extraction is where the copper gets concentrated and purified before it becomes metal. It is an important stage of copper hydro metallurgy.
The copper-bearing solution is mixed with an organic phase that contains an extractant. Copper ions move from the water into the organic phase. The two phases are then separated, and the copper-loaded organic phase moves to a stripping stage, where the copper is transferred into a high-concentration electrolyte - a solution ready for electrowinning.
Key equipment includes:
- Mixer–settlers for extraction
- Organic phase and aqueous phase transfer systems
- Stripping equipment
- Electrolyte storage cells and circulation system
A well-designed extraction and stripping circuit supplies the electrowinning stage with a copper-rich electrolyte of stable composition. Design must account for copper concentration, acidity, impurity profile, phase-separation behaviour and the recycling stability of the organic phase.

Mixer-Settler
5. Electrowinning (EW)
Electrowinning is where the dissolved copper finally becomes solid metal again.
The copper-rich electrolyte flows into electrowinning cells. Under direct current, copper ions gain electrons and deposit onto the cathode, gradually building up a metallic copper layer. When the layer is thick enough, you have cathode copper.
Main components:
- Electrowinning cells with cathode and anode systems
- A DC rectifier power supply
- Electrolyte circulation and temperature control
- Current, voltage and electrolyte monitoring systems
Electrowinning performance is affected by current density, electrolyte temperature, copper concentration, acidity, electrode material and impurity levels.
Operating parameters must be determined from the specific electrolyte composition, equipment design and product quality targets - one project's settings should not be copied straight onto another.
With stable control, the process produces cathode copper that meets the required quality standards.

Electrowinning workshop

Electrowinning workshop & Cathode Plate





