Conductive Beam For Copper Electrowinning Cathodes
video

Conductive Beam For Copper Electrowinning Cathodes

High-quality conductive beam, also widely named cathode hanger bar or conductive rod, is specially designed for copper electrowinning and electrorefining tankhouses. Our stainless steel clad copper composite conductive beam adopts pure copper core and robotic laser welding to deliver stable conductivity and long service life under acid mist corrosion.
Send Inquiry
Product Introduction
Design of Cathode Plate for Copper EW
Conductive Beam (Hanger Bar / Conductive Rod) for Copper Electrowinning Cathodes

In copper electrowinning and electrorefining tankhouses, the conductive beam - also called the hanger bar - plays a critical structural and electrical role.

It carries electrical current to the cathode plate while supporting the full weight of the electrode assembly. At the same time, it must withstand long-term exposure to acid mist, high humidity, and continuous thermal cycling.

In many tankhouses, common issues such as uneven copper deposition, overheating at contact points, early corrosion, or cathode plate deformation are often traced back to poor conductive beam design or manufacturing quality.

PRS conductive beams are engineered specifically for real tankhouse operating conditions and are fully compatible with 316L stainless steel cathode plates used in ISA and OK processes.

 

 

Material & Construction Details of Conductive Beam (Hanger Bar)

 

Every composite conductive beam we manufacture adopts a two-layer clad structure: anti-corrosion stainless steel outer sleeve + high-conductivity solid copper inner conductive rod.

This dual-layer design balances ultra-low resistance and mechanical strength for long-term electrolysis service.

 

 

Copper Core of Conductive Beam

The inner conductive rod inside each hanger bar is produced from standard ASTM C11000 high-purity copper sourced from certified copper manufacturers.

This copper core brings prominent advantages:

  • High electrical conductivity
  • Stable continuous current transmission
  • Uniform current distribution across the whole cathode plate surface The solid copper core guarantees consistent electrical efficiency for the full service cycle of your conductive beam.

 

 

Metallurgical Bonding Technology for Composite Conductive Beam

 

The service lifespan of any stainless steel clad copper hanger bar mainly depends on the bonding quality between stainless steel cladding and copper conductive rod. PRS applies exclusive cold forming technology to form full metallurgical bonding between two layers of the composite conductive beam.

This approach eliminates internal gaps that could otherwise cause:

  • Increased electrical resistance
  • Localized overheating
  • Internal corrosion over time

Compared with mechanical assembly methods, metallurgical bonding provides greater long-term reliability under thermal cycling and mechanical stress.

 

 

Robotic Laser Welding

 

After beam forming, the conductive beam(hanger bar) is joined to the 316L stainless steel cathode blade using automated robotic laser welding.

Advantages of this method include:

  • High precision and repeatability
  • Clean welds without flux contamination
  • Minimal thermal deformation
  • Consistent cathode plate flatness

This level of welding consistency is particularly important for automated cathode stripping systems, where dimensional accuracy directly affects stripping efficiency.

 

 

 

 

Products Description

 

PRS supplies diversified composite conductive beam / hanger bar cross-section profiles to fit all mainstream copper electrowinning and electrorefining tankhouse layouts.

 

Standard Cross‑Section Sizes Available

  • 316L SS‑clad Copper Conductive Beams: 23×23 mm, 13×43 mm, 20×40 mm, 25×40 mm, 20×43.5 mm, 24×43 mm, 25×45 mm, 23×40 mm
  • 316L SS‑clad Copper‑clad Steel Conductive Beams: 28.5×49 mm, 24.5×44 mm

 

We offer a large selection of ready‑made profiles that cover the requirements of most copper electrowinning and electrorefining plants, which helps you avoid extra mold opening costs.

 

Custom cross‑section dimensions can also be produced based on your cathode plate design, cell layout, contact bar spacing or existing plant drawings.

 

316L SS Clad Copper Hanger Bar Cross-Section

 

Length and Width of the Conductive Beam Cross-Section

 

 

Conductive Beam(Hanger Bar) Configurations

 

PRS offers three standard conductive beam designs to match different process systems and project budgets.

Type

Structure

Materials

Welding

Suitable For

Picture

Stainless Steel Cladding Copper

Copper core fully clad by 316L stainless steel

316L + ASTM C11000 copper

Robotic laser welding

OK process, longest service life

Details of Conductive Beam - Cross Section

Copper Cladding Stainless / Carbon Steel

Copper layer over steel core

Copper + stainless / carbon steel

Conventional welding

ISA process, cost focused projects

Details of Conductive Beam - Cross Section 3

Triple Layer (SS–Cu–Steel)

Steel core + copper layer + stainless cladding

316L + copper + mild steel

Robotic laser welding

Optimized OK process, high current density

Details of Conductive Beam - Cross Section 2

 All configurations utilize metallurgical bonding between layers to ensure stable conductivity and mechanical durability.

 

 

Typical Performance Characteristics

Under standard tankhouse operating environments, our clad copper hanger bar (conductive beam) delivers stable comprehensive performance:

  • Low and stable contact resistance during long-term continuous operation
  • High-strength laser welded joints adapting to repeated overhead crane handling cycles
  • Outstanding anti-corrosion performance supported by 316L stainless steel outer cladding
  • Uniform current distribution covering the full surface of permanent cathode plates


The actual service life of your conductive beam will fluctuate based on electrolyte chloride concentration, workshop temperature and daily tankhouse maintenance standards.
 

 

Shipment & Customer Feedback

 

We have completed multiple busbar orders for customers worldwide. Shipment photos are available for reference.

 

"We have recently made a few tests on your bar and I can say you have a very good product."

- Customer after on-site trial

conductive beam package     PRS finished conductive beam

 

 

 

FAQ

Q1: What factors shorten the service life of a conductive beam / hanger bar?

A: The lifespan is mainly influenced by three factors:

  • Chloride concentration in the electrolyte
  • Acid mist control within the tankhouse
  • Maintenance of electrical contact surfaces

Higher chloride levels or poor ventilation may accelerate corrosion.

Q2: How to select the matching conductive beam type for my copper plant?

A: If your plant operates using the OK process, stainless steel cladding copper beams are typically preferred for their durability.

For ISA process systems, copper clad steel beams remain a widely used and cost-effective solution.

For projects seeking balanced cost and performance, the triple-layer design is often suitable.

Q3: Can you customize conductive beam / hanger bar to fit our existing tankhouse?

A: Yes. PRS frequently manufactures conductive beams tailored to existing tankhouse layouts.

Customization can include:

  • Beam length
  • Cross section size
  • Welding structure
  • Cathode blade connection

Production can be based on drawings or on-site measurements.

 

Hot Tags: conductive beam for copper electrowinning cathodes, China conductive beam for copper electrowinning cathodes suppliers, Cathode Blank, Stainless Steel Cathode, 316L Stainless Steel Cathode, LDX 2101 Stainless Steel Cathode, SS 316L Cathode, cathode plate

Send Inquiry

whatsapp

Phone

E-mail

Inquiry